Различия

Здесь показаны различия между двумя версиями данной страницы.

--- dev:pi:main [2016/10/06 09:20]
denis [shutdown]
+++ dev:pi:main [2016/12/09 10:15] (текущий)
denis [shutdown]
@@ Строка 96: / Строка 96: @@
 <code bash>
   sudo apt-get install python-smbus i2c-tools
-  sudo apt-get purge fake-hwclock
+  sudo apt-get purge fake-hwclock ntp
-  sudo apt-get purge ntp
   sudo apt-get install ntpdate # TODO: not found
@@ Строка 148: / Строка 147: @@
 ===== shutdown =====
-{{:dev:pi:rpi_shutdown_scheme.png?200|}}
 {{:dev:pi:rpi_shutdown_scheme.png|}}
+''/home/pi/softshut/softshut.py'':
+<code python>
+#!/usr/bin/python
+import time
+from subprocess import call
+import RPi.GPIO as gpio
+pinBt=19
+pinAC=21
+pinLed=23
+dlyShutdownBt = 5
+dlyShutdownAC = 10
+dlyLedOk = 1
+dlyLedFast = 0.1
+def loop():
+  hasBt = False
+  hasAC = False
+  timeBt = 0
+  timeAC = 0
+  dlyLed = dlyLedOk
+  terminated = False
+  while gpio.input(pinBt)>0 or gpio.input(pinAC)>0:
+    for i in range(0,3):
+      gpio.output(pinLed, True)
+      time.sleep(dlyLedFast)
+      gpio.output(pinLed, False)
+      time.sleep(dlyLedFast)
+    time.sleep(dlyLedOk)
+  while not terminated:
+    if gpio.input(pinBt)==0:
+      if timeBt > 0:
+        print "Bt OK"
+        timeBt = 0
+    else:
+      if timeBt == 0:
+        print "Bt failed"
+        timeBt = time.time()
+      else:
+        if time.time() - timeBt > dlyShutdownBt:
+          print "Bt shutdown"
+          doShutdown()
+          terminated = True
+    if gpio.input(pinAC)==0:
+      if timeAC > 0:
+        print "AC OK"
+        timeAC = 0
+    else:
+      if timeAC == 0:
+        print "AC failed"
+        timeAC = time.time()
+      else:
+        if time.time() - timeAC > dlyShutdownAC:
+          print "AC shutdown"
+          doShutdown()
+          terminated = True
+    if (timeAC > 0  or  timeBt > 0) and dlyLed == dlyLedOk:
+      dlyLed = dlyLedFast
+    elif timeAC == 0  and  timeBt == 0  and  dlyLed != dlyLedOk:
+      dlyLed = dlyLedOk
+    gpio.output(pinLed, True)
+    time.sleep(dlyLed)
+    gpio.output(pinLed, False)
+    time.sleep(dlyLed)
+def eventButton(pin):
+  print "Button shutdown"
+  doShutdown()
+def doShutdown():
+#  call('halt', shell=False)
+  print "SHUTDOWN!!!"
+gpio.setmode(gpio.BOARD)
+gpio.setup(pinBt, gpio.IN)
+gpio.setup(pinAC, gpio.IN)
+gpio.setwarnings(False)
+gpio.setup(pinLed, gpio.OUT)
+loop()
+gpio.cleanup()
+</code>
+''/etc/rc.local'':
+<code bash>
+# add this line before "exit 0"
+python /home/pi/softshut/softshut.py &
+</code>