✎ idsdrive.ecz [ПромАвтоматика]

Эта страница только для чтения. Вы можете посмотреть исходный текст, но не можете его изменить. Сообщите администратору, если считаете, что это неправильно.
====== idsdrive.ecz ======
Частотный преобразователь IDS-Drive.
 
<note important>ВНИМАНИЕ: выявлено, что современные частотники IDS-Drive сильно садят линию, больше 5 частотников IDS-Drive на одной линии работать не может!!! 
</note>

Используемый протокол - MODBUS, для разных серий отличается. 

[[http://www.chastotniki.ru/documents/idsdrive/IDS-Drive_Z.pdf]]

Лучше смотреть по книжке из самого частотника, возможно что протокол изменится в рамках одной серии с течением времени!

<code yaml>
plugin.peripherial:

  module.atv:
    netaddr:  1
    portnum:  1
    type:     idsdrive.ecz
    enable:   on
    emulate:  off

</code>



===== Теги =====

^  tagname  ^  address  ^  description  ^
^  read/write  ^^^
|Control  |  0x2000  |Управление          |
|FreqSet  |  0x2001  |Задание частоты     |
^  readonly  ^^^
|FreqReq  |  0x1  |Заданная частота  |
|FreqOut  |  0x2  |Выходная частота  |
|CurrOut  |  0x3  |Выходной ток  |
|RotSpd  |  0x4  |Скорость вращения  |
|Voltage  |  0x5  |Напряжение DC  |
|Temper  |  0x6  |Температура преобразователя частоты  |
|Error1  |  0xA  |Отчет ошибки 1  |
|Error2  |  0xB  |Отчет ошибки 2  |
|Error3  |  0xC  |Отчет ошибки 3  |
|Error4  |  0xD  |Отчет ошибки 4  |


===== Серия B =====


<code yaml>
plugin.peripherial:
  enable: on

#    B222T4BP/B372T4BG  
#  1/2 start  6-soft stop 5-hard stop

  module.inv502:
    netaddr:  1
    portnum:  4
    type:     modbus
    emulate:  off
    enable:   on

    maxWriteSizeInp:  64
    maxWriteSizeReg:   6

    tags:
      - name:          Cmd
        type:          uint16
        region:        hldreg
        access:        wo
        address:       4096
        readEnd:       on


      - name:          Status
        type:          uint16
        region:        hldreg
        access:        ro
        address:       8192
        readEnd:       on


      - name:          SetFreq
        type:          uint16
        region:        hldreg
        access:        rw
        address:       12288
        readEnd:       on


      - name:          SetedFreq
        type:          uint16
        region:        hldreg
        access:        ro
        address:       12319
        readEnd:       on


      - name:          CurFreq
        type:          uint16
        region:        hldreg
        access:        ro
        address:       12289


      - name:          Current
        type:          uint16
        region:        hldreg
        access:        ro
        address:       12292
        readEnd:       on



      - name:          FaultAC
        type:          uint16
        region:        hldreg
        access:        ro
        address:       32768
        readEnd:       on



      - name:          ActualFreq
        type:          uint16
        region:        hldreg
        access:        ro
        address:       12308
        readEnd:       on

</code>


===== Серия E =====


<code yaml>
plugin.peripherial:
  enable: on


#e222t4bp/e372t4bg

  module.inv502:
    netaddr:  1
    portnum:  4
    type:     idsdrive.ecz
    enable:   on
    emulate:  off

</code>


===== Серия N =====


<code yaml>
plugin.peripherial:
  enable: on

#1/2-start   5/6-stop   %freq=10000     N152T4NK   

  module.inv502:
    netaddr:  1
    portnum:  4
    type:     modbus
    emulate:  off
    enable:   on

    maxWriteSizeInp:  64
    maxWriteSizeReg:   6

    tags:
      - name:          Cmd
        type:          uint16
        region:        hldreg
        access:        wo
        address:       8192
        readEnd:       on


      - name:          SetFreqProc
        type:          uint16
        region:        hldreg
        access:        wo
        address:       4096
        readEnd:       on


      - name:          OutFreq
        type:          uint16
        region:        hldreg
        access:        ro
        address:       28672


      - name:          SettedFreq
        type:          uint16
        region:        hldreg
        access:        ro
        address:       28673

      - name:          Current
        type:          uint16
        region:        hldreg
        access:        ro
        address:       28676
        readEnd:       on



      - name:          Status
        type:          uint16
        region:        hldreg
        access:        ro
        address:       32768
        readEnd:       on


      - name:          Status2
        type:          uint16
        region:        hldreg
        access:        ro
        address:       12288
        readEnd:       on

</code>


===== Серия Z =====


<code yaml>
plugin.peripherial:
  enable: on

#18-start   1-stop   %freq=10000   Z152T4NK   

  module.inv502:
    netaddr:  1
    portnum:  4
    type:     modbus
    emulate:  off
    enable:   on

    maxWriteSizeInp:  64
    maxWriteSizeReg:   6

    tags:
      - name:          Cmd
        type:          uint16
        region:        hldreg
        access:        wo
        address:       8192

      - name:          SetFreq
        type:          uint16
        region:        hldreg
        access:        wo
        address:       8193


      - name:          CurFreq
        type:          uint16
        region:        hldreg
        access:        ro
        address:       8450

      - name:          OutFreq
        type:          uint16
        region:        hldreg
        access:        ro
        address:       8451

      - name:          OutCur
        type:          uint16
        region:        hldreg
        access:        ro
        address:       8452


</code>





===== Серия M =====


<code yaml>
plugin.peripherial:
  enable: on

#    M222T4VB
# Cmd: 1 - RUN  3-Stop  4-FastStop
# Freq:  /100


  module.inv502:
    netaddr:  1
    portnum:  1
    type:     modbus
    emulate:  off
    enable:   on

    maxWriteSizeInp:  64
    maxWriteSizeReg:   6

    tags:
      - name:          Freq
        type:          uint16
        region:        hldreg
        access:        rw
        address:       6
        readEnd:       on

      - name:          Cmd
        type:          uint16
        region:        hldreg
        access:        wo
        address:       8192
        readEnd:       on

      - name:          OutFreq
        type:          uint16
        region:        hldreg
        access:        ro
        address:       53248
        readEnd:       on

      - name:          Current
        type:          uint16
        region:        hldreg
        access:        ro
        address:       53253
        readEnd:       on


</code>