====== Raspberry Pi ====== ===== install raspbian ===== https://www.raspberrypi.org/documentation/installation/installing-images/linux.md df -h sudo umount /dev/sdb1 sudo dd bs=4M if=2015-11-21-raspbian-jessie.img of=/dev/sdb sudo dd bs=4M if=/dev/sdb of=from-sd-card.img truncate --reference 2015-11-21-raspbian-jessie.img from-sd-card.img diff -s from-sd-card.img 2015-11-21-raspbian-jessie.img sync ===== initial setup ===== sudo raspi-config user: ''pi''\\ pass: ''raspberry'' ===== keyboard ===== ''/etc/default/keyboard'': XKBLAYOUT="us" ===== temperature ===== <code bash> #!/bin/bash cpuTemp0=$(cat /sys/class/thermal/thermal_zone0/temp) cpuTemp1=$(($cpuTemp0/1000)) cpuTemp2=$(($cpuTemp0/100)) cpuTempM=$(($cpuTemp2 % $cpuTemp1)) echo CPU temp"="$cpuTemp1"."$cpuTempM"'C" echo GPU $(/opt/vc/bin/vcgencmd measure_temp) </code> ===== wifi ===== sudo iwlist wlan0 scan|more ''sudo nano /etc/network/interfaces'' allow-hotplug wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp ''sudo nano /etc/wpa_supplicant/wpa_supplicant.conf'' ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="YOURSSID" psk="YOURPASSWORD" } sudo ifdown wlan0 sudo ifup wlan0 ===== jdk ===== http://www.rpiblog.com/2014/03/installing-oracle-jdk-8-on-raspberry-pi.html http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html download ''jdk-8-linux-arm-vfp-hflt.tar.gz for Linux ARM v6/v7 Hard Float ABI'' sudo tar zxvf jdk-8-linux-arm-vfp-hflt.tar.gz -C /opt sudo update-alternatives --install /usr/bin/javac javac /opt/jdk1.8.0/bin/javac 1 sudo update-alternatives --install /usr/bin/java java /opt/jdk1.8.0/bin/java 1 sudo update-alternatives --config javac sudo update-alternatives --config java java -version javac -version ===== rtc ds3231 ===== 1. Enable I2C: sudo raspi-config "7 Advanced Options" / "A6 I2C" 2. Install I2C-tools: sudo apt-get install python-smbus sudo apt-get install i2c-tools 3. Check Pi starts I2C automatically in ''/etc/modules'': i2c-dev 4. Check user has group (change ''pi'' to required): sudo adduser pi i2c 5. Update to latest packeges: sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade 6. reboot