Команды консоли

Актуальный перечень команд консоли можно получить в самой консоли командой h.

Пример вывода команды h:

run>h
General format:
  <comand>     common command
  p:<command>  plugin command, where 'p' is a plugin name
  m:<command>  module command, where 'm' is a module name

Common commands:
  ansi off|on                   turns off/on ansi colors
  check [mod filter]            checks internal errors of the modules
  h                             shows this help
  i [mod]                       module info
  load plg mod                  loads new module
  quit                          stop and exit
  reload [mod1 mod2 ...]        reloads modules. Can be used while running
  remove mod                    unloads existing module
  st mod tag val                sets a new value to a tag
  start                         start tasks
  state load|save [mod1 ...]    loads or saves state of modules to file
  stop                          stop tasks
  stx mod tag val               sets a new value to a group of tags, where mod and tag are regex expressions
  susp [off|on] mod             switches suspend mode for a module
  tl .|limit n|filter           shows tags:
                                Continue from showed tag, ex: tl .
                                Set list limit (default is 1000), ex: tl limit 20
                                Filtering, ex: tl mymod.* .*[E,e]rror.*
  version                       shows version of the core

peripherial:
  m:logerror cnt                sets logerror counter value

rpsvrtcp:
  m:debugInfoWrite on|off       turns on/off info on writing tags
  m:hidden on|off               turns on/off hidden tags
  m:infosetflag on|off          turns on/off showing SETFLAG command firing

serial:
  m:disable all|port            disables for all ports or for one port if specified
  m:enable all|port             enables for all ports or for one port if specified

tcpserver:
  p:log portnum on|off          turns on/off logging